API 20E Certification

API 20E Certified Fastener Manufacturer in India.

API 20E Certification.Process

Fasteners Engineering Pvt. Ltd. (FEPL) manufactures high-integrity bolting for critical oil and gas service under API Monogram License No. 20E-0141. Based in Bangalore, we supply stud bolts, machined bolts, screws, and nuts to valve OEMs, EPC contractors, and energy projects across India, the UAE, the USA, and Europe.
What sets API 20E apart from standard commercial supply is the level of process control behind each product — controlled heat treatment, verified material chemistry, documented mechanical testing, and a quality system audited by the American Petroleum Institute. Every fastener leaving our facility under the API Monogram carries that assurance.

API Monogram Certification — License No. 20E-0141

FEPL is certified under API 20E for the manufacture of alloy and carbon steel bolting used in oil and gas applications. The API Monogram program requires manufacturers to maintain documented quality systems, demonstrate process control across heat treatment and machining, and undergo periodic third-party audits by the American Petroleum Institute.

Our certification covers manufacturing up to BSL-3 — the highest specification level under API 20E — which includes full material traceability from the original heat, controlled and recorded heat treatment cycles, and mandatory mechanical testing prior to release.

FEPL Bangalore API certification
FEPL Bangalore API certification
Designed for Demanding Service Conditions
Oil and gas bolting failures are rarely about the grade on the datasheet. They happen when the process behind the grade is not controlled — when heat treatment is inconsistent, when material traceability breaks down, or when documentation cannot hold up in an audit. Our API 20E manufacturing scope is built around eliminating exactly those risks.

Our certified bolting is used in:
High-pressure and high-temperature (HPHT) valve and piping assemblies
Sour service environments requiring NACE MR0175 / ISO 15156 compatible grades
Safety-critical pressure-retaining connections per ASME B16.5 and B16.47
Subsea and topside oil and gas installations
Petrochemical plants and refinery applications

Product Range

We manufacture a complete range of bolting for valve OEM and oil and gas applications, including stud bolts (fully threaded and double-ended), heavy hex bolts, socket head cap screws, and heavy hex nuts in grades 2H, 2HM, 7, and 7M. Custom fasteners manufactured to customer drawings are also within scope.

Surface Protection

Coating requirements vary widely across projects and service environments. We offer black oxide, zinc plating (blue and yellow passivation), hot dip galvanizing, PTFE and Xylan coatings, manganese phosphate, and nickel or silver plating. Selection is guided by the application, service conditions, and project specification.

Manufacturing Scope Under API 20E

Our license covers the following product types and manufacturing methods:

Category

Details

Products covered

Stud Bolts, Machined Bolts, Screws, Nuts

Machined threads

BSL-1, BSL-2, BSL-3

Rolled threads

BSL-1, BSL-2, BSL-3

Hot formed bolts & screws

Below 1.50″ diameter and above 1.50″ diameter

Hot formed nuts

All sizes

Maximum specification level

BSL-3

Materials

ASTM A193 B7 and B7M — the most widely specified alloy steel grades for high-temperature bolting
ASTM A320 L7 and L7M — for low-temperature and cryogenic service
ASTM A194 2H, 2HM, 7, and 7M — heavy hex nuts for high-pressure applications
ASME B18 series — dimensional standards for bolts and screws

All incoming material is verified in-house using our spectrometer before entering production, confirming chemistry against the required specification.

Manufacturing in Bangalore — End to End

Our facility processes over 180 metric tons of steel annually. Every critical process — forging, heat treatment, CNC machining, surface treatment, and inspection — is performed in-house. This is not just an operational preference; it is a requirement of our API 20E quality system. Outsourcing any critical process breaks the traceability chain.

Key in-house capabilities include:

Spectrometer for chemical verification of all incoming raw material
Heat treatment plant — controlled annealing, hardening, and tempering with documented cycle records
Universal testing machine — tensile and mechanical property testing
Hardness testing (Rockwell and digital) — post heat treatment verification
Impact testing machine — for low-temperature and sour service grades
CNC machining — precision thread machining to BSL-1, 2, and 3 tolerances
Phosphating and electroplating units — in-house surface treatment

Certifications & Compliance

FEPL holds the following certifications relevant to oil and gas, pressure equipment, and export supply:

Certification

Relevance

API 20E Monogram — Lic. 20E-0141

Critical oil and gas bolting — BSL-1 to BSL-3

ISO 9001

Quality management system across all manufacturing processes

PED — Pressure Equipment Directive (EU)

Accepted for pressure equipment projects in European markets

EIL — Engineers India Limited

Approved for oil, gas, and petrochemical projects under EIL specification

Untitled design - 2024-10-18T155423.776
Untitled design - 2024-10-18T155629.881
FEPL Bangalore Studs
FEPL Bangalore API certification

Common Questions

What does API 20E certification actually require from a manufacturer?

API 20E requires manufacturers to maintain a documented quality management system, demonstrate control over heat treatment and material traceability, and undergo periodic third-party audits by the American Petroleum Institute. Products manufactured under the Monogram must be traceable to the original material heat, and mechanical testing results must be documented and available. It is significantly more stringent than simply supplying to an ASTM material specification.

What is the difference between BSL-1, BSL-2, and BSL-3?

BSL stands for Bolting Specification Level. BSL-1 is the base level covering dimensional and material conformance. BSL-2 adds controlled heat treatment and hardness testing. BSL-3 — the highest level — requires full traceability from raw material heat, documented heat treatment records, mandatory mechanical testing, and a third-party audited quality system. Most critical valve and pressure equipment specifications call for BSL-2 or BSL-3. FEPL is capable of manufacturing to all three levels.

Can you verify FEPL's API Monogram license?

Yes. FEPL’s API Monogram license number is 20E-0141. This can be verified directly through the API Monogram licensee directory on the American Petroleum Institute’s official website.

Do you supply fasteners for sour service applications?

Yes. We manufacture in NACE MR0175-compatible grades including ASTM A193 B7M and ASTM A194 2HM for use in hydrogen sulphide environments. Material selection for sour service should always be confirmed against the project’s specific H2S partial pressure and temperature conditions.

What markets do you supply to?

We supply to customers across India, the UAE, the USA, and Europe. Our PED certification supports supply into European pressure equipment projects, and our EIL approval covers projects under Engineers India Limited specification. Third-party inspection through agencies such as TÜV, Bureau Veritas, DNV, and SGS is available on request.

Can you manufacture fasteners to a custom drawing or special specification?

Yes. Custom fasteners manufactured to customer drawings are within our scope. Contact our team with your specification, drawing, and quantity requirements and we will confirm feasibility and lead time.

https://feplbangalore.com/wp-content/uploads/2026/06/Bolts-page-Img-2.jpeg

Enquiries & Technical Discussions

For bolting requirements, project specifications, or technical queries, contact our team directly. We work with procurement engineers, project teams, and valve OEM sourcing teams to confirm material grades, certification scope, and delivery requirements before an order is placed.
Email:
marketing@feplbangalore.com
Phone:
+91-9845144990 / +91-8618959194
Address:
#55/2, Hoodi, Ayyapa Nagar Main Road, Bengaluru – 560048, Karnataka, India
Mon–Sat: 8:30 am to 5:30 pm IST