|
Diameter Range |
M12 – M100 | 1/4″ – 4″ |
|
Length |
Custom up to 6 meters |
|
Thread Type |
UNC / UNF / Metric Coarse — per project specification |
|
Thread Class |
6g / 2A (standard) • 3A close tolerance available on request |
|
Manufacturing Process |
Bar → CNC machining → Thread rolling → Heat Treatment→ Visual + dimensional inspection |
|
Hardness Control |
Controlled as per ASTM grade requirements, with hardness testing conducted after heat treatment to ensure compliance. |
|
Charpy Impact |
Available for low-temperature grades (A320 L7 / L7M) — test reports supplied |
|
Coating Options |
Plain • Zinc phosphate • PTFE (Xylan) • Hot-dip galvanized |
|
Inspection & Reports |
MTCs (EN 10204 3.1 / 3.2) • Hardness • Dimensional • Impact on request • PMI |
Note: Stud bolt lengths for ASME B16.5 Class 150–2500 and B16.47 Series A/B available from stock lists. Custom lengths to drawing accepted.
Grade selection is critical for flange bolting integrity. The table below maps common service conditions to recommended ASTM grades.
|
Standard / Ambient Service |
ASTM A193 B7 (alloy steel, SAE 4140) • Most common grade for oil & gas |
|
Sour Service (H2S) |
ASTM A193 B7M |
|
High Temperature |
ASTM A193 B16 (chrome-moly) |
|
Austenitic / CRA Service |
ASTM A193 B8M (SS316) |
|
Low Temperature / Cryogenic |
ASTM A320 L7 / L7M |
|
Corrosive / Offshore |
Duplex UNS S31803 • Super Duplex S32750 / S32760 |
|
Severe Corrosion / CRA |
Inconel 625 • Inconel 718 • Monel 400 • Hastelloy C276 |
All configurations manufactured to dimensional standards. Custom thread forms, special end geometries, and proprietary coatings available on enquiry.
